BinTec X3200, User Manual

Page: 141 / 419

X3200 User’s Guide 141
X3200 and the WAN
5
➤
Press SAVE.
The entries are saved and listed.
➤
Leave
WAN P
ARTNER
➧
ADD
➧
WAN N
UMBERS
with EXIT.
➤➤
PPP
authentication
Now enter the
➤➤
PPP settings of your WAN partner. These are used to au-
thenticate your connection partner.
When a call is received, the Calling Party Number is always sent over the ISDN
➤➤
D-channel . This number enables X3200 to identify the caller
(
➤➤
CLID ), provided the caller is entered as a WAN partner. After identifica-
tion with CLID, the router can additionally carry out PPP authentication with the
WAN partner before it accepts the call. The router needs the necessary data for
this, which you should enter here. First establish the type of authentication pro-
cess that should be performed, then enter a common password and two user
names. You get this information, for example, from your Internet Service Pro-
vider (ISP) or the system administrator at your head office. The call is only ac-
cepted if the data entered in X3200 matches the caller’s data.
To set the PPP authentication for the WAN partner, proceed as follows:
➤
Go to WAN
PARTNER
➧
ADD
➧
PPP:
The menu contains the following fields:
X3200 Setup Tool BinTec Communications AG
[WAN][ADD][PPP]: PPP Settings (BigBoss) MyRouter
Authentication CHAP + PAP
Partner PPP ID BigBoss
Local PPP ID LittleIndian
PPP Password Secret
Keepalives off
Link Quality Monitoring off
OK CANCEL
Use <Space> to select
Field Meaning
Authentication Authentication protocol