BinTec X3200, User Manual

Page: 206 / 419

206 BinTec Communications AG
Advanced Configuration
6
Confirm with Save and Exit until you have returned to the main menu.
6.2.6 Layer 1 Protocol (ISDN B-Channel)
ISDN B-channel You can define the Layer 1 Protocol of the ISDN
➤➤
B-channel that X3200
is to use for connections to the WAN partner. The default setting is the protocol
for 64-kbps ISDN data connections, which is the default value of the B-channel.
Only change the setting if explicitly necessary (e.g. when configuring a high-
speed Internet access).
This is configured in WAN P
ARTNER
➧
E
DIT
➧
A
DVANCED
S
ETTINGS
:
Table 6-20: WAN P
ARTNER
➧
E
DIT
➧
A
DVANCED
S
ETTINGS
Layer 1 Protocol contains the following selection options:
Field Meaning
Layer 1 Protocol Defines which Layer 1 Protocol X3200 is to
use. This setting applies only to outgoing calls
to the WAN partner and to incoming calls from
the WAN partner, if they have been identified
from the calling party number.
For incoming calls that cannot be identified from the calling party number,
X3200 uses the settings under Item in menu CM-1BRI, ISDN S0
➧
I
NCOMING
C
ALL
A
NSWERING
as the Layer 1 Protocol (see chapter 5.1.4, page 112 ).
Possible Values Meaning
ISDN 64 kbps For 64-kbps ISDN data connections. This is the
default value.
ISDN 56 kbps For 56-kbps ISDN data connections.
Modem Not available in X3200 .