BinTec X3200, User Manual

Page: 39 / 419

X3200 User’s Guide 39
In Advance of Configuration
3
➤
If you can’t find the entry, install the TCP/IP protocol as explained below.
Windows NT
➤
Click the Windows Start button and then Settings
➧
Control Panel.
➤
Double click Network.
➤
Select the Protocols tab and look for TCP/IP Protocol in the list of network
components.
➤
If you can’t find the entry, install the TCP/IP protocol as explained below.
Windows 2000
➤
Click the Windows Start button and then Settings
➧
Network and DCN
Connections.
➤
Double click LAN Connection.
➤
Click the General tab and then Properties. Look for Internet Protocol
(TCP/IP) in the list of network components.
➤
If you can’t find the entry, install the TCP/IP protocol as explained below.
Installing the TCP/IP Protocol
Windows 95/98
➤
Click Add in the Network dialog box.
➤
Select Protocol in the list of network components and click Add.
➤
Select Microsoft as manufacturer and TCP/IP as network protocol and
click OK.
➤
If you are in an existing network, you may have to make other settings at
this point. Ask your system administrator.
➤
If you are setting up a new network, click OK.
➤
Follow the on-screen instructions and restart your PC when you have fin-
ished.
➤
Repeat the installation for all the PCs in your network.
Windows NT
➤
Click the Protocols tab in the Network dialog box. Click Add.
➤
Select TCP/IP protocol from the list of network protocols. Click OK.
➤
If setting up a new network, click Yes to answer the question.
➤
In an existing network, ask your system administrator.