BinTec X3200, User Manual

Page: 61 / 419

X3200 User’s Guide 61
Configuring X3200 Under Windows
3
➤
Click OK.
If you have configured X3200 as a DHCP server and your PCs as DHCP
clients (the usual case), X3200 will now assign the PCs their IP addresses.
This happens automatically under Windows NT or Windows 2000 (program
IPCONFIG), but you must confirm the assignment under Windows 95/98
(program WINIPCFG).
➤
Click Yes to start WINIPCFG. Click Renew and then OK.
A message window opens asking if you want to configure the CAPI client.
➤
Click Yes.
If an error message appears saying that the Configuration Wizard could not
log in to the router because the password has been changed, proceed as fol-
lows:
➤
If you know the password of the existing configuration, enter the password
and click OK.
The Wizard tries to log in to X3200 .
➤
If you do not know the password, click Unknown and then OK.
X3200 is reset to the ex works state and all the previous configurations are
lost.
The Configuration Wizard always saves your newly created configuration on
the PC, even if errors occur during transmission to the router.
Further settings can be made to the configuration file saved on your PC using
the Wizard.