BinTec X3200, User Manual

Page: 182 / 419

182 BinTec Communications AG
Advanced Configuration
6
6.1.4 X.31 TEI
The menu CM-1BRI, ISDN S0
➧
A
DVANCED
S
ETTINGS
contains settings for
X.31 TEI (X.25 in the D-channel). You only need to make changes here if you
want to use the X.31 TEI value for CAPI applications.
The menu contains the following fields:
Table 6-7:
CM-1BRI, ISDN S0
➧
A
DVANCED
S
ETTINGS
Field Meaning
X.31 TEI Value X.31 TEI is detected automatically in ISDN
autoconfiguration and this value set to
specify.
If autoconfiguration has not detected TEI, you
can set
specify manually.
Specify TEI Value The value for X.31 TEI assigned by the
exchange.
This value is detected automatically by ISDN
autoconfiguration, but can also be entered
manually.
X.31 TEI Service Here you select the service for which you want
to use X.31 TEI. Possible values:
■
Capi
■
Capi Default
■
Packet Switch
Capi and Capi Default are for using X.31 TEI
for CAPI applications. For
CAPI, the TEI value
set in the CAPI application is used. For CAPI
Default, the value of the CAPI application is
ignored and the default value set here is always
used.
Set to Packet Switch if you want to use X.31
TEI for the X.25 router.