BinTec X3200, User Manual

Page: 73 / 419

X3200 User’s Guide 73
Configuring Fax and Answering Machine with RVS-COM Lite
3
➤
When you have adjusted the settings, click Apply and then OK.
➤
If you selected Express configuration main line, enter the extension of
your ISDN connection in the next window. Select one of the extensions you
have already entered with the
Configuration Wizard and assigned to the
CAPI service. You can only enter one extension with the configuration as-
sistant, but you can add more later.
➤
If you selected Express configuration PBX, enter in the next two windows
the extension and ISDN phone numbers (point-to-multipoint) and extension
number and prefix of the extension (point-to-point).
➤
Click Next.
➤
Click Next in the following windows and finally Finish.
The configuration with the configuration assistant is now complete.
3.8.2 Configuring RVS-COM Lite
In the following section, the numbers you have also set for the CAPI service with
the Wizard have to be allocated to different communications applications (fax,
answering machine). The following diagram illustrates which number in our con-
figuration example is to be used for a certain facility.
If you are operating X3200 on a point-to-point connection, an entry must be
made in Setup Tool in addition to the settings under Wizard. In
CM-1BRI, ISDN
S0
➧
I
NCOMING
C
ALL
A
NSWERING
, set the mode for the comparison of num-
bers to
left to right (DDI). The Wizard does not make these settings automati-
cally as this is not the default setting. See also chapter 5.1.4, page 112 .