BinTec X3200, User Manual

Page: 112 / 419

112 BinTec Communications AG
Basic Configuration with the Setup Tool
5
➤
Press SAVE.
You have returned to the main menu and the entries have been saved.
5.1.4 Configuring the WAN Interface
Interface to ISDN The next step involves configuring your X3200 ’s
➤➤
WAN interface . The
WAN interface is the physical interface to the
➤➤
ISDN . You can use it for di-
alup connections and with an extra license for leased lines as well. Its configu-
ration for dialup connections involves two steps:
■
Entering the settings of your ISDN connection:
Here you set the most important parameters of your ISDN connection.
■
Configuring Incoming Call Answering:
Here you tell your
➤➤
router how it should react to incoming calls from
the WAN.
Autoconfiguration,
ISDN Switch Type,
First enter the settings for your ISDN connection.
➤
Go to CM-1BRI, ISDN S0:
X3200 Setup Tool BinTec Communications AG
[WAN]: WAN Interface MyRouter
Result of Autoconfiguration: Euro ISDN, point-to-multipoint
ISDN Switch Type autodetect on bootup
D-Channel dialup
B-Channel 1 dialup
B-Channel 2 dialup
Incoming Call Answering>
Advanced settings>
SAVE CANCEL
Use <Space> to select