BinTec X3200, User Manual

Page: 202 / 419

202 BinTec Communications AG
Advanced Configuration
6
can be interlinked to form a rule chain. Each rule results in an action, but the
direction of the data packets for which it is to apply can also be stated for each
rule, i.e. for sent or received data packets.
Proceed as follows to define a rule for BOD:
➤
Go to IP
➧
B
ANDWIDTH ON
D
EMAND
(BOD)
➧
R
ULES FOR
BOD
➧
A
DD
.
In addition to the already familiar fields for definition of conventional rules (see
chapter 7.2.8, page 286 ), the menu contains the following fields:
Table 6-18: IP
➧
B
ANDWIDTH ON
D
EMAND
(BOD)
➧
R
ULES FOR
BOD
➧
ADD
The Action field, which indicates how a filtered out data packet is to be handled,
contains the following selection options:
Table 6-19: Action
Field Meaning
Direction Direction of data packets to which the rule is to
be applied. Possible values:
■
incoming: incoming data packets
■
outgoing: outgoing data packets
■
both: incoming and outgoing data packets
Number of Channels Number of B-channels that are to be added.
Possible values for
X3200 : 1 or 2.
Possible values Meaning
invoke M B-channels are added if the rule matches.
invoke !M B-channels are added if the rule does not
match.
deny M
B-channels are not added if the rule matches.
deny !M B-channels are not added if the rule does not
match.
ignore
The rule is ignored or it is omitted if part of a
rule chain.