BinTec X3200, User Manual

Page: 122 / 419

122 BinTec Communications AG
Basic Configuration with the Setup Tool
5
PPPoE configuration To carry out the PPPoE configuration, proceed step by step as described in the
example in chapter 5.2.2, page 155 .
5.1.6 Configuring X3200 as DHCP Server
IP addresses in the
LAN
Each PC in your
➤➤
LAN and X3200 requires its own IP address. If you con-
figure X3200 as a
➤➤
DHCP (Dynamic Host Configuration Protocol) server, it
automatically assigns those PCs in the LAN
➤➤
IP addresses from a pre-de-
fined IP address pool. A PC sends out an address request and in turn receives
its IP address assigned by X3200 . You do not need to assign fixed IP addresses
to PCs, which reduces the amount of configuration work in your network. To do
this, you set up a pool of IP addresses, from which X3200 assigns IP addresses
to hosts in the LAN for a defined period of time. A DHCP server also transfers
the addresses of the Domain Name Server entered statically or by PPP negoti-
ation (
➤➤
DNS ),
➤➤
NetBIOS name server (WINS) and standard
➤➤
gateway .
➤
Go to IP
➧
IP
ADDRESS POOL
LAN (DHCP)
➧
ADD:
If you use the ADSL connection of another provider, ask the provider about any
special features of your ADSL connection that need to be taken into account.
X3200 Setup Tool BinTec Communications AG
[IP][DHCP][ADD]: Add Range of IP Addresses MyRouter
Interface en1
IP Address 192.168.1.1
Number of Consecutive Addresses 8
Lease Time (Minutes) 120
MAC Address
Gateway
NetBT Node Type
not specified
SAVE CANCEL
Use <Space> to select