BinTec X3200 User Manual Download Page 192

Page: 192 / 419

192

BinTec Communications AG

Advanced Configuration

To do

Proceed as follows:

➤

Go to

WAN P

ARTNER

➧

DIT

➧

DVANCED

ETTINGS

➧

XTENDED

NTERFACE

ETTINGS

(

OPTIONAL

➤

Select Mode and Line Utilization Weighting.

➤

Enter Line Utilization Sample (sec) and for leased lines Maximum
Number of Dialup Channels.

➤

Press SAVE.

➤

Confirm with OK.

➤

Go to

WAN P

ARTNER

➧

DIT

➧

WAN N

UMBERS

➧

ADD.

➤

Enter Number.

➤

Select Direction.

➤

Press SAVE.

➤

Go to

WAN P

ARTNER

➧

DIT

➧

PPP.

➤

Select Authentication.

➤

Enter Partner PPP ID, Local PPP ID and PPP Password, if applicable.

➤

Confirm with OK.

➤

Press SAVE.

6.2.4

Always On/Dynamic ISDN (AO/DI)

Always On/Dynamic ISDN (AO/DI) uses the existing ISDN infrastructure to con-

figure a new service for the user without hardware changes: AO/DI is a perma-

nently available (always on) but nevertheless low-cost connection from the end

customer to the Service Provider.

Select Direction =

outgoing if you have set Mode = Bandwidth On Demand

Active.

Select Direction =

incoming (CLID), if you have set Mode = Bandwidth On

Demand Passive.

Summary of Contents for X3200



































































































































































































































































































































































































































Search results

Summary of Contents for X3200

Reviews:

Related manuals for X3200

Brands by name

Popular brands

BinTec X3200, User Manual

Search results

Summary of Contents for X3200

Reviews:

Related manuals for X3200

Brands by name

Popular brands