BinTec X3200, User Manual

Page: 197 / 419

X3200 User’s Guide 197
Settings Specific to WAN Partners
6
➤
Leave X.25
➧
R
OUTING
➧
ADD
with Exit.
➤
Leave
X.25
➧
R
OUTING
with Exit.
You have returned to the main menu.
Configuring AO/DI
partner as WAN partner
To define an AO/DI-capable PPP interface, proceed as follows:
➤
Go to WAN P
ARTNER
➧
ADD
.
➤
Enter Partner Name, e.g.
AODI partner
.
➤
Select Encapsulation: PPP.
Proceed as follows to make the PPP settings:
➤
Go to
WAN P
ARTNER
➧
ADD
➧
PPP.
➤
Select Authentication, e.g. CHAP .
➤
Leave out Partner PPP ID.
➤
Enter Local PPP ID, e.g. bintec_router .
➤
Enter PPP Password twice, e.g.
secret
.
An asterisk appears on the screen as a place marker for each letter you en-
ter for the password.
➤
Confirm with OK.
To activate AO/DI on the PPP interface and enter the X.25 address, proceed as
follows:
➤
Go to WAN P
ARTNER
➧
ADD
➧
A
DVANCED
S
ETTINGS
.
The following part of the menu is relevant for this configuration step:
Field Meaning
Layer 1 Protocol Defines which Layer 1 Protocol X3200 is to
use. There is only one meaningful setting for
AO/DI:
AO/DI.
Channel Bundling Defines whether or which type of channel bun-
dling is to be used for connections to the WAN
partner (see manual, chapter 7.2.2). If
AO/DI is
selected under Layer 1 Protocol, dynamic is
set automatically for Channel Bundling.