BinTec X3200 User Manual Download Page 205

Page: 205 / 419

X3200

User’s Guide

205

Settings Specific to WAN Partners

Restricting mail

reception to D-channel

In the following configuration example, mail reception is restricted to the D-

channel and there is no change to B-Channel Mode. The inquiry about whether

new mails have been received does not cause a change to B-Channel Mode ei-

ther.

Proceed as follows to define the relevant filter for BOD:

➤

Go to

➧

ANDWIDTH

EMAND

(BOD)

➧

ILTER

➧

➤

Enter Description:

mail_pop3_in.

➤

Select Protocol:

tcp.

➤

Enter Destination Address:

172.16.08.15

➤

Enter Destination Mask:

255.255.255.255

➤

Select Destination Port:

specify.

➤

Enter Specify Port:

110.

➤

Press SAVE.

A list of all the previously defined filters appears.

➤

Leave

➧

ANDWIDTH

EMAND

(BOD)

➧

ILTER

with Exit.

Proceed as follows to define a rule for BOD:

➤

Go to

➧

ANDWIDTH

EMAND

(BOD)

➧

ULES

FOR

BOD

➧

➤

Select Action:

deny M.

➤

Select Direction:

incoming.

➤

Select Number of Channels:

➤

Select Filter:

mail_pop3_in (2).

➤

Press SAVE.

➤

Leave

➧

ANDWIDTH

EMAND

(BOD)

➧

ULES

FOR

BOD with Exit.

Assigning BOD-Rules

to Interfaces

➤

Go to

➧

ANDWIDTH

EMAND

(BOD)

➧

ONFIGURE

NTERFACES

FOR

BOD.

➤

Choose the interface you are configuring BOD for: e.g.

bod_partner

➤

In the next menu window choose the First Rule to be applied:

RI 2 FI 2

(mail_pop3_in).

Summary of Contents for X3200



































































































































































































































































































































































































































Search results

Summary of Contents for X3200

Reviews:

Related manuals for X3200

Brands by name

Popular brands

BinTec X3200, User Manual

Search results

Summary of Contents for X3200

Reviews:

Related manuals for X3200

Brands by name

Popular brands