BinTec X3200, User Manual

Page: 357 / 419

X3200 User’s Guide 357
BRICKtools for Unix Commands
11
11.2 BRICKtools for Unix Commands
The bricktrace and capitrace programs are included in BRICKtools for UNIX on
the BinTec Companion CD. They are started on a Unix workstation by entering
the following commands.
bricktrace
bricktrace [-h23aeFpiNtxs] [-T <tei>] [-c <cref>]
[-r <cnt>] [-H <host>] [-P <port>] <channel> <unit> <slot>
Is used to trace and evaluate ISDN messages (D- and B-channels).
–
-h
: hexadecimal output
–
-2
: layer 2 output
–
-3
: layer 3 output
–
-a
: asynchronous HDLC (B-channel only)
–
-e
: ETS300075 (Euro File Transfer) output
–
-F
: fax (B-channel only)
–
-p
: PPP (B-channel only)
–
-i
: IP output (B-channel only)
–
-N
: Novell IPX output (B-channel only)
–
-t
: output in ASCII text (B-channel only)
–
-x
: raw dump mode
–
-s
: check X3200 for available trace channels
–
-T
<tei>: set TEI filter (D-channel only)
–
-c
<cref>: set callref filter (D-channel only)
–
-r
<cnt>: only receive cnt bytes
–
-H
<host>: IP address or name of IP host
–
-p <port>
: specify trace TCP port (default: 7000).
–
channel
:
0
= D-channel or X.21 interface,
1
...
31
Bx-channel
–
unit
: 0 ... 1. selects the physical interface for modules with two inter-
faces
–
slot
: 1 ... 2. indicates the slot in which the module is installed