5. Technical Safety Inspection and Preventive Maintenance
1 / 2 0 1 0
5 - 4
BA-TE-DE08C M.KAY
SW9xx_SM_Chapter 5-1_1-2010.doc/pdf <110301> yymmdd
B. Braun Avitum AG
Dialog
+
SW 9.xx
S M
Check List (S = Technical Safety Inspection Points; M = Preventive Maintenance Points)
Note:
Text in { } brackets is information for the execution of the check list!
NO YES OK
M
2.22 Conductivity
Sensors
2.22.1
ENDLF sensor: Visual inspection
2.22.2
BICLF sensor: Visual inspection
M
2.23 Piston
Pumps
2.23.1
BIC piston pump: Visual inspection
2.23.2
KP piston pump: Visual inspection
M
2.23.3
UF piston pump: Visual inspection
M
2.24
Blood leak detector (BLD) test passed
2.24.1
Check blood leak detector and calibrate if necessary
n
M
2.25
Degassing Pressure Sensor PE
(permissible tolerance ±13 [mbar])
- Comparison measurement (at approx. -530):
Measurement instrument: ......................... Display on machine: .........................
[mbar]
- Comparison measurement (at approx. -130):
Measurement instrument: ......................... Display on machine: .........................
[mbar]
M
2.26
Dialysate Outlet Pressure Sensor PDA
(permissible tolerance ±13 [mbar])
- Comparison measurement (at approx. -530):
Measurement instrument: ......................... Display on machine: .........................
[mbar]
- Comparison measurement (at approx. 0):
Measurement instrument: ......................... Display on machine: .........................
[mbar]
- Comparison measurement (at approx. +530):
Measurement instrument: ......................... Display on machine: .........................
[mbar]
M
2.27
Heparin Pump
2.27.1
Position (80 mm
±
15 mm) {Drive fast forward to end position with 30 ml syringe. Check display position in mm.}
.........................
[mm]
M
2.28
Set summer/winter time {TSM, Treatment Support, System Configuration, if applicable in this country}
3.
Function Inspection (Document Measurement Values)
S
3.1
Blood Pump:
- Check function, moveability, noise rating
3.1.1
- Check roller/one-way bearing; clean and lubricate shaft slightly if necessary
3.1.2
- Alarm cover switch
S
3.2
Single-Needle Pump:
Option present
3.2.1
- Check function, moveability, noise rating
3.2.2
- Check roller/one-way bearing; clean and lubricate shaft slightly if necessary
3.2.3
- Alarm cover switch
S
3.3
Venous Tubing Clamp SAKV:
- Function/gap checked, set gap 1.4 (+0.1 mm) if necessary
S
3.4
Arterial Tubing Clamp SAKA:
Option present
3.4.1
- Function/gap checked, set gap 1.4 (+0.1 mm) if necessary
S
3.5
Arterial Pressure PA:
(permissible. tolerance ±10 [mmHg])
Comparison measurement (at approx. -400):
Measurement instrument: ......................... Display on machine: ......................
[mmHg]
Comparison measurement (at approx. 0):
Measurement instrument: ......................... Display on machine: ......................
[mmHg]
S
3.6
Inlet Pressure PBE:
(permissible. tolerance ±10 [mmHg])
Comparison measurement (at approx. 0):
Measurement instrument: ......................... Display on machine: ......................
[mmHg]
Comparison measurement (at approx. +400):
Measurement instrument: ......................... Display on machine: ......................
[mmHg]
S
3.7
Venous Pressure PV:
(permissible. tolerance ±10 [mmHg])
- Comparison measurement (at approx. 0):
Measurement instrument: ......................... Display on machine: ......................
[mmHg]
Comparison measurement (at approx. +400):
Measurement instrument: ......................... Display on machine: ......................
[mmHg]
S
3.8
Single-Needle Pressure PBS:
(permissible. tolerance ±10 [mmHg])
Option
present
- Comparison measurement (at approx. 0):
Measurement instrument: ......................... Display on machine: ......................
[mmHg]
- Comparison measurement (at approx. +400):
Measurement instrument: ......................... Display on machine: ......................
[mmHg]
