3 . R e p a i r I n s t r u c t i o n s
1 / 2 0 1 0
3 - 70
BA-TE-DE08C M.KAY
SW9xx_sm_Chapter 3_1-2010.doc/pdf <100329> yymmdd
B. Braun Avitum AG
Dialog
+
SW 9.xx
F i e l d S e r v i c e U t i l i t i e s V 2 . 0 0 - S e t M S T
CRC = XXXX - OK
W r i t e S y s t e m C o n f i g u r a t i o n ( U S B S t i c k - > D i a l o g + H a r d D i s k )
N o s o u r c e i s f o u n d . . .
AQ
: back to previous menu
The utility searches for sources. An input screen can
open with the following information (see left figure),
i.e. no sources were found on the USB stick because the
system configuration data subdirectories are empty.
System configuration data must be stored to the USB
stick before you can write system configuration data to
the hard disk drive (CFC).
3.
Press
AQ
to go back to the previous menu.
4.
Use the Read System Configuration utility to read
the system configuration data from the
hard disk drive (CFC) to the USB stick.
F i e l d S e r v i c e U t i l i t i e s V 2 . 0 0 - S e t M S T
CRC = XXXX - OK
W r i t e S y s t e m C o n f i g u r a t i o n ( U S B S t i c k - > D i a l o g + H a r d D i s k )
Writing System Configuration to from: TLCver=90832/VX_XX
A r e y o u s u r e ?
AQ
: no
EQ
: yes
An input screen opens to Write System Configuration to
the hard disk drive (CFC) with the following hardware
keys:
AQ
:
No, system configuration file is not written
to , exit from the utility
EQ
Yes, system configuration file is written to
hard disk drive (CFC)
