B. Braun Dialog+, Service Manual

Page: 160 / 455

3 . R e p a i r I n s t r u c t i o n s 1 / 2 0 1 0 3 - 98
BA-TE-DE08C M.KAY
SW9xx_sm_Chapter 3_1-2010.doc/pdf <100329> yymmdd
B. Braun Avitum AG
Dialog
+
SW 9.xx
Unit HD HDF Online US Default Modified
Language Selection
English - active active active
German - inactive inactive inactive
Summer Time Setting (enter values accordingly)
Begin of Summer Time D/M/Y dd.mm.yyyyy dd.mm.yyyyy dd.mm.yyyyy
h:min xx:xx xx:xx xx:xx
End of Summer Time D/M/Y dd.mm.yyyyy dd.mm.yyyyy dd.mm.yyyyy
h:min xx:xx xx:xx xx:xx
Time Difference h:min xx:xx xx:xx xx:xx
ABPM
Delete Button for Data - YES YES YES
Auto Start of Cyclic Reading (from Patient Identification
Media) - NO NO NO
ABPM Cyclic Reading Stop at Entering Disinfection - YES YES YES
Taking Over Limits from Patient’s Parameters - YES YES YES
bioLogic RR Comfort
Guide Line Mode - NO NO -
Suggested SYS Lower Limit - NO NO -
bioLogic RR Algorithm ID - 100 100 -
Miscellaneous Parameters
Click Sound - NO NO YES
Warning and Writing (Saving) Patient Parameters - NO NO YES
* Skip Self Tests
* A skip of the self tests for servicing only! - NO NO NO
Automatic Preparation Start - YES YES NO
Data Validation with - Touch Touch Enter Key
UF Profile Editing in Treatment - YES YES NO
Manual Bypass Confirmation Window Enabled - NO NO YES
End of Therapy Sound Duration - 100 % 100 % 100 %
Chopped Alarm Sound - NO NO NO
Suppression of Warning Sounds in Preparation - NO NO NO
Automatic Reinfusion Start at Entering End of Therapy - YES YES NO
DCI
Dianet Address - 1 1 1
Data Set - MPI 0.12 MPI 0.12 MPI 0.12
DBI
Baud Rate kBaud 38.4 38.4 38.4
User Logout Time min 15 - ON 15 - ON 15 – ON
Message Warning Time min 15 - OFF 15 - OFF 15 - OFF
Data Set DBI 1.61 - inactive inactive inactive
DBI 1.72 - inactive inactive inactive
DBI 2.00 - active active active
DBI 2.20 - inactive inactive inactive
DBI 2.21 - inactive inactive inactive
DBI-WAN Interface – Network Name Configuration
Pre-SN String is needed
- - - d / YES
SN String is needed - - - - / YES
Post-SN String is needed - - - / NO
Network Name (max. 15 chars.) - - - d-
Preventive Maintenance
Warning for Preventive Maintenance Enabled - NO NO NO
Load Interval - inactive inactive inactive
Elapsed Month - inactive inactive inactive
Setting Elapsed Month months 12 12 12
Elapsed Working Time Counter WTC - inactive inactive inactive
Setting Elapsed WTC hours 4000 4000 4000