Chapter 4 Unpacking and Inspecting
Installation and Commissioning Manual
111
F
S
P
3000R
7 R
11
.1 8000
0015930
Issue
B
, ©
2012
ADVA AG Optical Netw
orking
ADVA Conf
idential
Step 7
In case you have found any discrepancies, proceed as follows:
a) If the fiber management shelf has been damaged in transit,
immediately report the extent of damage by filing a claim with the
transportation company. Notify your ADVA Optical Networking
customer service representative or ADVA Optical Networking.
Have the following information ready:
•
Invoice number of shipper
•
Name of the damaged unit
•
Serial number and item number of the damaged unit
•
Description of damage
•
Effect of damage on the installation
If damaged unit must be returned to the factory, refer to
. Order replacement of equipment, if
necessary.
b) If any standard item is missing, notify your ADVA Optical Net-
working customer service representative or ADVA Optical Net-
working immediately.
c) If the wrong unit has been shipped, contact ADVA Optical Net-
working customer service representative or ADVA Optical Net-
working.
For contact details, see the Preface of this guide,
End of Procedure
Inspecting an FSP 3000R7 Shelf
This section describes the shelf inspection that must be performed in order to
check an incoming shelf for any visible damage, completeness and proper con-
figuration. In addition, a thorough inspection of the shelf shipped have to be
made to confirm all modules are properly installed, seated, and not loose.
For convenience, the 9HU shelf, 7HU shelf and the 1HU shelf types are referred
to as the shelf, with any differences clearly noted in the following.
Inspection described below is identical to all FSP 3000R7 shelves.
To inspect a shelf, several tasks must be completed. Some tasks are detailed in
sub-tasks. Pay attention to the safety notices and additional information that are
given below.
CAUTION
Only Service Personnel are allowed to inspect a shelf.