7.6 Configuring the Serial Interface
533
Defining the
file system
In
MP_fileSystem,
define the file system for data transmission over the serial
interface. This machine parameter is not mandatory. Remove the parameter
from the configuration if you do not need a special file system.
In the drop-down menu, select one of two different file systems:
FEX:
File system for non-HEIDENHAIN devices (known as magnetic-tape file sys-
tem). Corresponds to the EXT1 and EXT2 modes of earlier TNC controls.
Use these settings if you are using printers, punches, or non-HEIDENHAIN
data transfer software.
FE1:
Use this setting for communication with the external HEIDENHAIN Floppy
Disk Unit FE 401 B or FE 401 as of prog. no. 230 626-03.
MP_fileSystem
Define the file system for file operation via the serial interface
Format:
Selection menu
Selection:
[ FEX ]
Magnetic-tape file system to be used for non-HEIDENHAIN
devices, such as printer, punch, or PC with other data transfer
software.
[ FE1 ]
Floppy-disk file system to be used for HEIDENHAIN Floppy Disk
Unit
Summary of Contents for MILLPWR G2
