ACU-RITE MILLPWR G2, Technical Manual

Page: 15 / 546

2.4 Grounding, and Connections 15
2 Introduction
2.1 Meaning of the Symbols Used in this Manual
2.2 Proper Operation
The described components may only be installed and operated as described
in this manual. Commissioning, maintenance, inspection and operation are
only to be performed by trained personnel.
2.3 Trained Personnel
Trained personnel in the sense of this manual means persons who are familiar
with the installation, mounting, commissioning, and operation of the
HEIDENHAIN components. Furthermore, electrical engineering work on the
system may be carried out only by trained electrical engineering technicians or
persons trained specifically for the respective application. Basically, persons
who perform work on HEIDENHAIN components must meet the following
requirements:

They must have been trained or instructed in the standards of safety engi-
neering.

They must have appropriate safety equipment (clothing, measuring
systems).

They should be skilled in first-aid practice.
2.4 Grounding, and Connections
See Chapter 4 of the Installation Manual (I.D. 1034382-20) for wiring, and
connection diagrams.
Danger
Failure to comply with this information could result in most serious up to
fatal injuries or in substantial material damage.
Attention
Failure to comply with this information could result in injuries and
interruptions of operation up to material damage.
Note
Insights for operation as well as important information, for example about
standards and regulations as well as for better understanding of the
document.