ACU-RITE MILLPWR G2, Technical Manual

Page: 143 / 546

4.7 Overview of the Machine Parameters 143
CfgSimPosition
Definition of simulated tool change position during mid-program startup;
Specifies the simulated tool-change position for TOOL CALL during mid-program startup.
[Key name of the T strobe]

value:
List with machine axes. The index corresponds to the logical axis number in MP_axisList .
axis
113501
(optional parameter)
Key name of the axis
Format: Selection menu
Input: Key names from CfgAxis
RUN
LEVEL3
position
113501
(optional parameter)
Position value of the axis
Specify the absolute position value with respect to the
machine datum (REF system). The TNC 320 assumes
that, after the PLC strobe, the listed axes are located
at the given positions and the non-listed axes are at
the same positions as before the PLC strobe.
Format: Numeric value
Input: Position value in [mm]
RUN
LEVEL3
CfgPlcOverrideDev
Configuration of sources for override values;
Define the hardware input of the potentiometers and the evaluation here.
[Key name of override device]
e.g. potentiometerF, potentiometerS etc.
source
104301
Selection of configurable source for override
values
Format: Selection menu
Input:

OVR1 :
Potentiometer 1

OVR2 :
Potentiometer 2

OVR3 :
Potentiometer 3

KEY :
Group of keys
Default: OVR1
RESET
LEVEL3
Parameter
MP number Function and input Behavior
Access
SW version