322
ACU-RITE Technical Manual MILLPWR
G2
5.13.2 Geometry Filter
The function of the filter, which takes effect before look-ahead in the geome-
try chain, depends on the setting in
MP_filterType.
Average:
The geometry filter smoothes corners. This method moves the
contour points in such a way that the change in direction is less distinct (see
figure below). This enables you to machine corners at a higher feed rate,
resulting in an improved workpiece surface quality.
Use the following machine parameters to influence this function:
• MP_tolerance: defines the maximum shift of a contour point
• MP_maxLength: Defines the filter width (i. e. the range within which
the geometry filter is effective)
Settings in the configuration editor:
NCchannel
channelSettings
Key for channel
CfgStretchFilter
filterType
tolerance
maxLength
Summary of Contents for MILLPWR G2
