ACU-RITE MILLPWR G2, Technical Manual

Page: 477 / 546

6.12 Diagnosis with the Online Monitor (OLM) 477
PosWithChainTime The value is “pre-calculated” in the spindle module and
then processed in the geometry chain. This value con-
siders the runtime of the IPO chain.
realAxisNr Number of the real axis to which a virtual axis is connec-
ted.
relIstPos Relative actual position per IPO clock
absIstPosNonMod Absolute actual position without any modulo calcula-
tion (for non-modulo axes: absIstPosNonModulo ==
absIstPos).
absSollPosNonMod Absolute nominal position for modulo axes without any
modulo calculation (only required for CC 424).
zulSchleppabst1 Permissible following error for warning.
zulSchleppabst2 Permissible following error for emergency stop error.
achsCmd Internal axis commands (e.g. freeze override, from
interpolator to spindle during thread cutting)
driveCmdWord Command for universal controller
vSollFilter Nominal speed is delayed (only used for axes in test
mode).
virtOffsetOn Feedforward of virtual offset is active.
rpfAktiv Reference run for this axis is active.
measureLatchAc-
tive Touch probe latch is active.
counterAbsPo-
sCheck Encoder monitoring is active.
checkPosStandstill Standstill monitoring is active.
toolCorrDelta Asynchronous tool compensation per IPO clock.
toolCorrNom Nominal value for asynchronous tool compensation.
toolCorrAkt Asynchronous tool compensation path executed until
now.
wpCorrDelta Asynchronous position compensation per IPO clock.
wpCorrNom Nominal value for asynchronous position compensa-
tion.
wpCorrAkt Asynchronous position compensation path executed
until now.
Variable Display