ACU-RITE MILLPWR G2, Technical Manual

Page: 111 / 546

4.7 Overview of the Machine Parameters 111
CfgUserPath
Paths for the end user;
Directories that are to be visible in the file manager.
These entries can be edited by the machine operator.
ncDir
102201
List of drives and/or directories
The drives and directories entered here are visible in
the file manager, provided that you have the required
access rights. The respective paths may contain NC
programs or tables, for example, floppy disk drive
directories, HDR or CFR directories, network drives,
etc.
Format: List [0...10]
Input: String of max. 260 characters
NOTHING
LEVEL1
fn16DefaultPath
102202
(optional parameter)
Default output path for the function
FN16: F-PRINT
in the program run operating modes
If no path is defined for the FN 16 function in the NC
program, the output is in the directory specified here.
Format: String
Input: Path of max. 260 characters
Path entry via selection window
NOTHING
LEVEL1
597 110-05
fn16DefaultPathSim
102203
(optional parameter)
Default output path for the function FN16: F-PRINT
in operating mode
Test Run
If no path is defined for the FN 16 function in the NC
program, the output is in the directory specified here.
Format: String
Input: Path of max. 260 characters
Path entry via selection window
NOTHING
LEVEL1
597 110-05
Parameter
MP number Function and input Behavior
Access
SW version