ACU-RITE MILLPWR G2, Technical Manual

Page: 165 / 546

4.7 Overview of the Machine Parameters 165
protocol
106702
MP5030
Communications protocol
Format: Selection menu
Input:

STANDARD :
Standard data transfer. Data transferred line-by-line.

BLOCKWISE :
Package-based data transfer, so-called ACK/NAK
protocol. Blockwise data transfer is controlled by
the control characters ACK (Acknowledge) and NAK
(Not Acknowledge).

RAW_DATA :
Data transferred without protocol. Transfer of cha-
racters without control characters. Protocol inten-
ded for transfer of data of the PLC.
Default: STANDARD
PLC/Pgm
run is locked
LEVEL2
dataBits
106703
MP5020 bit 0
Data bits in each transferred character
Format: Selection menu
Input:

7 bits :
7 data bits are transferred for each character trans-
ferred

8 bits :
8 data bits are transferred for each character trans-
ferred.
Default: 8 bits
PLC/Pgm
run is locked
LEVEL2
parity
106704
MP5020 bit 4/5
Type of parity checking
Format: Selection menu
Input:

NONE :
No parity formation

EVEN :
Even parity

ODD :
Odd parity
Default: NONE
PLC/Pgm
run is locked
LEVEL2
stopBits
106705
MP5020 bit 6/7
Number of stop bits
Format: Selection menu

1 stop bit :
1 stop bit is appended after each transferred charac-
ter.

2 stop bits :
2 stop bits are appended after each transferred cha-
racter.
Default: 1 stop bit
PLC/Pgm
run is locked
LEVEL2
Parameter
MP number Function and input Behavior
Access
SW version