4.7 Overview of the Machine Parameters
217
analogOffset
400102
MP1080
Offset on analog axis
Offset that is only effective for analog axes.
Format:
Numeric value
Input:
–1.0 to 1.0 [V]
Default:
0.0
[V]
RUN
LEVEL3
kvFactor2
400103
(optional parameter)
Proportional component of position controller
above MP_kvSpeedLimit
Parameter only for analog axes.
Note:
Compared with the iTNC 530, the Kv factor of the
TNC 320 has a different unit:
Unit
TNC 320
:
mm / (mm · sec)
Unit of the iTNC 530:m / (mm · min)
Therefore:
iTNC kv factor · 16.66 = TNC 320 kv factor
Format:
Numeric value
Input:
0.000 to 1 000.000 [1/s]
Default:
0.000 [1/s]
RUN
LEVEL3
kvSpeedLimit
400104
(optional parameter)
Limit velocity for MP_kvFactor2
Parameter only for analog axes.
Format:
Numeric value
Input:
0.0 to 36 000 000.0 [mm/min]
Default:
0.0 [mm/min]
RUN
LEVEL3
maxFeedAt9V
400105
Velocity at 9 volts
Format:
Numeric value
Input:
0.000000006
to 36 000 000
[mm/min] or [°/min]
Default:
4 999.98 [mm/min]
RUN
LEVEL3
accForwardFactor
400106
(optional parameter)
Factor for acceleration feedforward control
Parameter only for analog axes.
Format:
Numeric value
Input:
0.00000 to 0.01000
Default:
0.0
RUN
LEVEL3
Parameter
MP number
Function and input
Reaction/Access
Summary of Contents for MILLPWR G2
