4.7 Overview of the Machine Parameters
173
ProbeSettings
Touch-probe configuration
CfgTouchProbe
Defines behavior of the MILLPWR
G2
during probing.
mStrobeUTurn
108001
MP6160
M function for probing from opposite directions
Specify the number of the M function for spindle ori-
entation via the PLC.
Format:
Numerical value
Input:
-1 to 999
–1: Spindle orientation directly
via the NC
0: Function not active
PLC/Pgm
run is locked
LEVEL1
597 110-02
mStrobePos
108002
MP6161
M function for orienting the touch probe before
each probing procedure
Specify the number of the M function for spindle ori-
entation via the PLC.
Format:
Numerical value
Input:
-1 to 999
–1: Spindle orientation directly
via the NC
0: Function not active
PLC/Pgm
run is locked
LEVEL1
597 110-02
posAngle
108003
MP6162
(optional parameter)
Orientation angle
Format:
Numeric value
Input:
0 to 359.9999 [°]
PLC/Pgm
run is locked
LEVEL1
597 110-02
posTolerance
108004
MP5163
Tolerance for spindle angle
Format:
Numerical value
Input:
0.0000 to 3.0000 [°]
PLC/Pgm
run is locked
LEVEL1
597 110-02
Parameter
MP number
Function and input
Behavior
Access
SW version
Summary of Contents for MILLPWR G2
