ACU-RITE MILLPWR G2, Technical Manual

Page: 427 / 546

6.6 Error Messages and Log Files 427
To find a log file entry:
Call the “Find” dialog box:
 Press the FIND key.
 Enter the search string.
 Define the search direction.
Current and
previous error
log file The error log file uses two files, the current file and the previous file.
If the current file is full, the control switches the files. After converting the cur-
rent file to the previous file, the control creates a new current file.
To switch between the current and the previous error log file:
 Press the PREV FILE key.
 Press the
CURR FILE
key.
Filter Use a filter to limit the log file display to the following error groups:

Information

Warnings

Error

System error
In addition, you can select the following information:

Date and time from which you want the log file contents to be displayed.

Clients whose errors and error information are to be considered in the log
file display.
Whether the filter is taken into account depends upon the setting of the
FILTER ON/OFF key:
 Key active (Filter 0): Filter is taken into account
 Key not active (Filter FF): Filter is not taken into account