238
ACU-RITE Technical Manual MILLPWR
G2
speedTolerance
401103
Rotational speed (feed rate) window
Control window for message
RPM ATTAINED
.
Format:
Numeric value
Input:
0.000 000 01 to 100 [%]
Default:
10 [%]
Allowed in strobe
LEVEL 3
timeSpeedOK
401104
Hysteresis time for monitoring the speed
deviation
Format:
Numeric value
Input:
0.006 to 10 [s]
Default:
0.010 [s]
Allowed in strobe
LEVEL 3
syncTolerance
401105
Angle tolerance for spindle synchronism
Parameter reserved for lathe controls.
Format:
Numeric value
Input:
0.001 000 000 to 2 [°]
Default:
0.01 [mm]
Allowed in strobe
LEVEL 3
timeSyncOK
401106
Hysteresis time for spindle synchronism
Parameter reserved for lathe controls.
Format:
Numeric value
Input:
0.000 000 000 to 20 [s]
Default:
0.010 [s]
Allowed in strobe
LEVEL 3
masterAxis
402301
MP850.x
Assign a master axis to the slave axis.
Format:
Selection menu
Input:
Key name for the master axis from
CfgAxes/axisList
Default:
0
RUN
LEVEL3
597 110-04
mode
402302
Mode of the coupling
Format:
Selection menu
Input:
None
:
Axis has no coupling.
Position
:
Axis coupled via gantry (position coupling).
Torque
:
Torque coupling
Default:
None
RUN
LEVEL3
597 110-04
Parameter
MP number
Function and input
Reaction/Access
Summary of Contents for MILLPWR G2
