ACU-RITE MILLPWR G2, Technical Manual

Page: 442 / 546

442 ACU-RITE Technical Manual MILLPWR
G2
Modul 9180 Keystroke simulation
The module simulates NC keys and keys. You transfer the code of the desired
key.
If you transfer the code value zero, the number of occupied elements in the
keystroke queue is returned. In this case there is no keystroke simulation.
Call:
PS b/w/d/k <>Key code>
CM 9180
PL b/w/d <>Number of occupied elements / error status>
0: Key code was transferred, key queue is empty
1 to 16 : Key code was not yet simulated, max. 16
entries in the keystroke queue are possible
–1: For error see NN_GenApiModuleErrorCode
Error code:
Modul 9181 Disable NC key by PLC
The module disables individual NC keys.
Call:
PS b/w/d/k <>Key code>
CM 9181
PL b/w/d <>Error status>
0: NC key disabled
–1: For error see NN_GenApiModuleErrorCode
Error code:
Marker Value Meaning
NN_GenApiModule
Error 0 NC key was simulated
1 Error code in NN_GenApiModuleErrorCode
NN_GenApiModule
Error 1 Transferred parameter > maximum value
2 Transferred parameter invalid
22 Keystroke queue overflow
Marker Value Meaning
NN_GenApiModule
Error 0 NC key was disabled
1 Error code in NN_GenApiModuleErrorCode
NN_GenApiModule
Error 1 Transferred parameter > maximum value
2 Transferred parameter invalid