ACU-RITE MILLPWR G2, Technical Manual

Page: 225 / 546

4.7 Overview of the Machine Parameters 225
CfgReferencing
Axis parameters for the reference run;
For rotary axes and spindles, the velocity is specified in [°/min].
refType
400401
MP1350
Sequence for finding the reference mark
Format: Selection menu
Input:

None :
No traversing of the reference marks
If the reference run with the spindle is perfor-
med via a trip dog, this value must be set.

Switch, changing Dir :
For linear axes with speed encoder; reference
run with NC start

Switch, no changing Dir :
For linear axes with speed encoder; reference
run with NC start

without Switch :
For spindle, rotary table with angle encoder;
reference run with NC start

distance coded :
For distance-coded linear encoders; reference
run with NC start

distance coded + on the fly :
For distance-coded linear encoders; reference
run with axis-direction keys or NC start

without on the fly :
For spindle; reference run with M3, M4

Endat Encoder :
For axes with EnDat encoder; reference-mark
traverse not necessary
Default: Switch, changing Dir
RUN
LEVEL3
refPosition
400403
MP960,
MP3430
Position of the machine datum
Position is defined relative to the scale reference
point. For encoders with distance-coded refe-
rence marks, with respect to the zero reference
mark.
For EnDat encoders, with respect to the absolute
encoder datum.
Format: Numeric value
Input: -100 000.0 to + 100 000.0 [mm]
Default: 100.0 [mm]
RUN
LEVEL3
Parameter
MP number Function and input Reaction/Access