ACU-RITE MILLPWR G2, Technical Manual

Page: 120 / 546

120 ACU-RITE Technical Manual MILLPWR
G2
trackApiState
103203
(optional parameter)
Automatic update of the active M functions
Format: Selection menu
Input:

TRUE:
(Only effective if you use the numerical API 1.0!)
The PLC run-time system automatically updates the
statuses of the spindle and coolant M functions in
the list of active M functions. This list is based on
the markers M4005 to M4008 and M4040 to
M4042.

FALSE:
(Only effective if you use the API 3.0 symbolic
memory interface!)
You have to update the list of active M functions
through the PLC program. In this case, you have to
use Module 9088 to delete the M functions from
the list or to add them to the list. If the parameter is
not available, it behaves as if it were set to TRUE in
order to ensure compatibility.
NOTHING
LEVEL3
revokeMState
103204
(optional parameter)
Automatic removal of M functions from the status
display
Format: Selection menu
Input:

TRUE :
If Module 9088 is used to add an M function to the
list of active M functions, the PLC run-time system
evaluates the parameter
MP_revoke (CfgPlcM-
Strobe). All of the M functions listed there are remo-
ved from the list of active M functions. (Only pos-
sible if a single NC channel is active)

FALSE :
If more than one NC channel is configured or the
value is set to FALSE, the parameter
MP_revoke
(CfgPlcMStrobe) is not evaluated. In this case you
have to use Module 9088 to remove the M func-
tions from the list of active M functions.
NOTHING
LEVEL3
apiErrorReaction
103202
(optional parameter)
Reaction to unexpected error in a PLC module.
Format: Selection menu
Input:

LOG :
The error that occurred is entered in the PLC error
log.

DISPLAY :
The error that occurred is shown on the control
screen.

STOP_PLC :
The current PLC program is stopped if an error
occurs during a PLC module call.
Default: LOG
NOTHING
LEVEL3
Parameter
MP number Function and input Behavior
Access
SW version