ACU-RITE MILLPWR G2, Technical Manual

Page: 231 / 546

4.7 Overview of the Machine Parameters 231
CfgSpindle
Machine parameters for configuring the spindle;
To be defined only for axis that is configured as a spindle.
fastInputType
401501
Treatment of the fast input for the spindle
Format: Selection menu
Input:

none :
Spindle does not have any trip dog for reference
end position (no signal) or the signal is not eva-
luated.

forStopping :
For M19 without rotary encoder, the spindle is
positioned at the trip dog upon receiving this
input signal.

forReferencing :
The input signal is used as spindle reference
signal. The TNC 320 handles the signal of the
trip dog for reference end position as reference
pulse of the encoder.
Default: none
RUN
LEVEL3
fastInput
401502
(optional parameter)
Number of the fast PLC input for the spindle
reference run
Format: Numeric value
Input: 0 to 32767
RUN
LEVEL3
zeroPosEdge
401503
(optional parameter)
Evaluation of the edge
Cam edge indicating the position of 0° for positive
direction of spindle rotation.
Input: l

zeroOne :
Zero-one transition

oneZero :
One-zero transition
RUN
LEVEL3
stopOnSwitchSpeed
401504
(optional parameter)
Shaft speed for positioning to the trip dog
If in MP_fastInputType the forStopping value is
set, you must enter the speed for positioning to
the trip dog here.
Format: Numeric value
Eingabe: Speed in [1/min]
max. of 9 decimal places
Default: 0
RUN
LEVEL3
Parameter
MP number Function and input Reaction/Access