528
ACU-RITE Technical Manual MILLPWR
G2
MP_baudRate
Data transfer rate in baud
Format:
Selection menu
Imput:
Use the drop-down menu to define the transfer rate for the
interface. Minimum value is 110 baud, maximum value 115200
baud.
Communications
protocol
The protocol of a serial connection means the controlling of the data flow by
feeding reserved ASCII characters into the data stream. Define the communi-
cations protocol of the interface in
MP_protocol.
For an overview of all communication protocols available on the control, see
figure on page 535.
MP_protocol
Communications protocol
Format:
Selection menu
Selection:
[ Standard ]
Standard data transfer.
Transferring data line-by-line.
[ Blockwise ]
Blockwise data transfer.
“ACK/NAK” protocol. Blockwise data transfer is controlled by
the control characters ACK (Acknowledge) and NAK (Not
Acknowledge).
[ Raw_Data ]
Transfer without protoco.
Transfer of characters without control characters.
Protocol intended for transfer of “raw” data of the PLC.
Default:
Restart
Word length
Data bits
Define whether a character is transmitted with 7 or 8 data bits.
MP_dataBits
Data bits in each transferred character
Format:
Selection menu
Selection:
[ 7 bits ]
[ 8 bits ]
Default:
8 bits
Summary of Contents for MILLPWR G2
