manualshive.com logo in svg
background image

• Supports up to 2 Ultra ATA/133

drives with a single PCI card 

• StorSwitch non-blocking

architecture for reliable,
scalable, and high-performance
hardware RAID

• Half-length, half-height low

profile PCI form factor

• On-card processor and firmware 

OS provides intelligent drive 
management and all RAID functions

• RAID 0, 1, and JBOD support

• High data throughput,

delivering 180MB/sec reads 
and 127MB/sec writes

• 32-bit/33 MHz bus master,

PCI 2.2 compliant

• BIOS setup utility and PnP, BBS

compliant bootable BIOS

• Hot-swap feature for data 

availability

• Windows

®

and Linux

®

operating

system support

Escalade

™ 

7000-2

ATA RAID Controller

Performance RAID for Workstations

Driven by desktop PC volumes, ATA disk drives

represent a tremendous value with higher capacity,

reliability and performance than ever before. By

providing the features and performance previously

available only high end RAID systems, 3ware’s Escalade

controllers bring true fault-tolerant RAID features to

workstations using cost-effective ATA drives.The

Escalade 7000-2 controller meets or exceeds the

requirements for new storage applications such as 

video editing, gaming and fault tolerant workstations.

Escalade 7000-2 ATA RAID Controller 

3ware’s non-blocking, StorSwitch architecture with

onboard processor makes the difference. Similar 

to network packet-switching hardware, StorSwitch

architecture delivers superior reliability, scalability, and

high performance over traditional ATA solutions. Each

disk drive has a dedicated cable for both drive and

cable fault isolation providing greater system reliability.

StorSwitch architecture incorporates RAID 0 and 1

functions in hardware for higher performance than

software implementations.The on-board processor

handles all disk commands, and directs data flow

through the switch for reliable RAID operation, fully

independent of the host CPU and OS.

The 7000-2 supports drive hot-swap, allowing for

RAID 1 drive replacement while the system is running.

Escalade 7000-2 Firmware

Escalade 7000-2 shares the same firmware OS as 

with the Escalade 4,8, and 12-port versions providing

intelligent disk management, including hot swap,

rebuilding, verification and array creation and deletion.

Fault detection, cable error detection and retry,

command read-back, and dynamic sector repair features

contribute to data availability and robustness. SCSI-like

command queuing and elevator seek algorithms provide

high-end RAID controller performance.

Self Monitoring Analysis and Reporting Technology

(SMART) information is collected from the disk drives

and made available locally and remotely through 3ware’s

Disk Manager (3DM) utility, making the storage easier to

manage and more reliable.

Escalade 7000-2  Software

Escalade 7000 software consists of drivers and disk

management middleware and deliver the same software

features as the Escalade 7500 controllers. By adhering

to a SCSI device driver model, 3ware insures compati-

bility with major operating systems.This means that file

systems and applications work transparently with this

familiar disk interface.

The Escalade PCI card includes a built-in BIOS utility for

creating, deleting, verifying and rebuilding arrays, making

installation and set-up easy. 3DM, 3ware’s web browser-

based disk management utility, allows local and remote

management and monitoring of arrays and their disks.

3DM has a simple native 

GUI, as well as a browser interface. 3DM also provides

email notification of disk array events and other error

conditions.

Escalade Sets a New Standard for RAID

By enabling reliable, cost-effective, high-performance

storage that is easy to integrate and manage, the

Escalade 7000-2 ATA RAID controller sets the standard

in workstation storage.

3ware’s Escalade 7000-2 ATA RAID controller delivers affordable hardware RAID 
for workstations. Based on proven network switching technology, 3ware’s StorSwitch

architecture provides superior reliability and performance over software-based ATA
solutions. 3ware’s Escalade 7000-2 card sets the workstation standard for ATA RAID.

7000

SERIES

ESCALADE

PR

ODUCT

FEA

TURES

Отзывы: