ABB ACS280, Firmware Manual, Page: 260 / 430

260 Parameters
Transparent 16 Transparent control profile (with a 16-bit control
word).
Note: This selection is applicable only to CANopen.
8
Transparent 32 Transparent control profile (with a 32-bit control
word).
Note: This selection is applicable only to CANopen.
9
58.26 EFB ref1 type
Selects the type and scaling of reference 1 received
through the embedded fieldbus interface.
The scaled reference is displayed by
03.09 EFB
reference 1 .
Speed or
frequency
Speed or frequency Type and scaling is chosen automatically according to
the currently active operation mode as follows.
0
Transparent No scaling is applied. 1
General Generic reference without a specific unit.
Scaling: 1 = 100. 2
Torque Torque reference. The scaling is defined by parameter
46.03 Torque scaling
.
3
Speed Speed reference. The scaling is defined by parameter
46.01 Speed scaling
.
4
Frequency Frequency reference. The scaling is defined by
parameter
46.02 Frequency scaling
.
5
58.27 EFB ref2 type
Selects the type and scaling of reference 2 received
through the embedded fieldbus interface.
The scaled reference is displayed by
03.10 EFB
reference 2
.
Speed or
frequency
58.28 EFB act1 type
Selects the type/source and scaling of actual value 1
transmitted to the fieldbus.network through the
embedded fieldbus interface.
Speed or
frequency
Speed or frequency Type and scaling is chosen automatically according to
the currently active operation mode as follows:
0
Transparent The value selected by parameter 58.31 EFB act1
transparent source is sent as actual value 1. No
scaling is applied (the 16-bit scaling is 1 = 1 unit).
1
No. Name/Value Description Default
FbEq 16
Operation mode
(see par.
19.01
)
Reference 1 type
Speed control Speed
Torque control Speed
Frequency control Frequency
Operation mode
(see par.
19.01
)
Actual 1 type (source) Scaling
Speed control
Speed
( 01.01 Motor speed
used )
46.01 Speed scaling
Torque control
Frequency control
Frequency
(
01.06 Output
frequency
)
46.02 Frequency
scaling