ABB ACS280, Firmware Manual, Page: 14 / 430

14 Introduction to the manual
Related manuals
The related manuals are listed behind the front cover under List of related
manuals
.
Cybersecurity disclaimer
This product is designed to be connected to and to communicate information
and data via a network interface. It is Customer's sole responsibility to provide
and continuously ensure a secure connection between the product and
Customer network or any other network (as the case may be). Customer shall
establish and maintain any appropriate measures (such as but not limited to
the installation of firewalls, application of authentication measures, encryption
of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches,
unauthorized access, interference, intrusion, leakage and/or theft of data or
information. ABB and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference,
intrusion, leakage and/or theft of data or information.
See also section
User lock (page 86 ).
Parameter User-adjustable operation instruction to the drive, or signal
measured or calculated by the drive
PID controller Proportional–integral–derivative controller
PLC Programmable logic controller
PMSM Permanent magnet synchronous motor
PM Permanent magnet
PMaSYNRM Permanent Magnet Assisted Synchronous Reluctance
Machine
R1, R2,… Frame (size)
RCD Residual current device
Rectifier Converts alternating current and voltage to direct current
and voltage.
RFI Radio frequency interference
RO Relay output; interface for a digital output signal.
Implemented with a relay.
SIL Safety integrity level. See chapter Safe torque off function in
the drive hardware manual.
STO Safe torque off. See chapter
Safe torque off function
in the
drive hardware manual.