ABB ACS280, Firmware Manual, Page: 247 / 430

Parameters 247
45.19 Comparison power
Actual power that the motor absorbs when
connected direct-on-line and operating the
application. The value is used for reference when
energy savings are calculated.
Note: The accuracy of the energy savings calculation
is directly dependent on the accuracy of this value. If
nothing is entered here, then the nominal motor
power is used by the calculation, but that may inflate
the energy savings reported as many motors do not
absorb nameplate power.
0.00 kW
0.00…100000.00 kW Motor power. 1 = 1 kW
45.21 Energy calculations
reset
Resets the savings counter parameters
45.01
…
45.10
.
Done
Done Reset not requested (normal operation), or reset
complete.
0
Reset Reset the savings counter parameters. The value
reverts automatically to
Done
.
1
45.24 Hourly peak power
value
Value of the peak power during the last hour, that is,
the most recent 60 minutes after the drive has been
powered up.
The parameter is updated once every 10 minutes
unless the hourly peak is found in the most recent 10
minutes. In that case, the values is shown
immediately.
0.00 kW
-3000.00 … 3000.00
kW
Peak power value. 10 = 1 kW
45.25 Hourly peak power
time
Time of the peak power value during the last hour. 00:00:00
Time. N/A
45.26 Hourly total energy
(resettable)
Total energy consumption during the last hour, that
is, the most recent 60 minutes.
You can reset the value by setting it to zero.
0.00 kWh
-3000.00 … 3000.00
kWh
Total energy. 10 = 1 kWh
45.27 Daily peak power value
(resettable)
Value of the peak power since midnight of the
present day.
You can reset the value by setting it to zero.
0.00 kW
-3000.00 … 3000.00
kW
Peak power value. 10 = 1 kW
45.28 Daily peak power time
Time of the peak power since midnight of the present
day.
00:00:00
Time. N/A
45.29 Daily total energy
(resettable)
Total energy consumption since midnight of the
present day.
You can reset the value by setting it to zero.
0.00 kWh
-30000.00 … 30000.00
kWh
Total energy. 1 = 1 kWh
45.30 Last day total energy
Total energy consumption during the previous day,
that is, between midnight of the previous day and
midnight of the present day
0.00 kWh
No. Name/Value Description Default
FbEq 16