manualshive.com logo in svg

ABB ACS280, Firmware Manual, Page: 242 / 430

Share
Download
ABB ACS280 Firmware Manual Download Page 242

242   Parameters

44.09

Brake open torque 

source

Defines a source that is used as a brake opening 

torque reference if:
• its absolute value is greater than the setting of 

parameter 44.10 Brake open torque, and

• its sign is the same as the setting of 44.10 Brake 

open torque.

Brake open 

torque

Zero

Zero.

0

AI1 scaled

12.12 AI1 scaled value.

1

AI2 scaled

12.22 AI2 scaled value.

2

FBA ref1

03.05 FB A reference 1.

3

FBA ref2

03.06 FB A reference 2.

4

Brake torque memory

Parameter 44.02 Brake torque memory.

7

Brake open torque

Parameter 44.10 Brake open torque.

8

44.10

Brake open torque

Defines the sign (ie. direction of rotation) and 

minimum absolute value of the brake open torque 

(motor torque requested at brake release in percent 

of motor nominal torque).
The value of the source selected by parameter 44.09 

Brake open torque source is used as the brake open 

torque only if it has the same sign as this parameter 

and has a greater absolute value.
Note: This parameter is not effective in scalar motor 

control mode.

0.0%

-1600.0 …1600.0%

Minimum torque at brake release.

See 

par.

46.03

44.11

Keep brake closed

Selects a source that prevents the brake from 

opening.
0 = Normal brake operation
1 = Keep brake closed
Note: This parameter cannot be changed while the 

drive is running.

Not used

Not used

0.

0

Used

1.

1

DI1

Digital input DI1 (10.02 DI delayed status, bit 0).

2

DI2

Digital input DI2 (10.02 DI delayed status, bit 1).

3

DI3

Digital input DI3 (10.02 DI delayed status, bit 2).

4

DI4

Digital input DI4 (10.02 DI delayed status, bit 3).

5

DIO1

Digital input/output DIO1 (11.02 DIO delayed status, 

bit 0).

10

DIO2

Digital input/output DIO2 (11.02 DIO delayed status, 

bit 1)

11

Timed function 1

Bit 0 of 34.01 Timed functions status.

18

Timed function 2

Bit 1 of 34.01 Timed functions status.

19

Timed function 3

Bit 2 of 34.01 Timed functions status.

20

Supervision 1

Bit 0 of 32.01 Supervision status.

24

Supervision 2

Bit 1 of 32.01 Supervision status.

25

Supervision 3

Bit 2 of 32.01 Supervision status.

26

No.

Name/Value

Description

Default
FbEq 16

Summary of Contents for ACS280















































































































































































































































































































































































































































Reviews:

No comments