ABB ACS280, Firmware Manual, Page: 262 / 430

262 Parameters
58.32 EFB act2 transparent
source
Selects the source of actual value 1 when parameter
58.29 EFB act2 type
is set to
Transparent
.
not used
not used None. 0
Other
Source selection (see
Terms and abbreviations
). -
58.33 Addressing mode
Defines the mapping between parameters and
holding registers in the 400101…465535 Modbus
register range.
Changes to this parameter take effect after the
control unit is rebooted or the new settings validated
by parameter
58.06 Communication control
(
Refresh
settings
).
Note : If parameter 58.01 = [3] CANopen, this
parameter is hidden.
Mode 0
Mode 0 16-bit values (groups 1…99, indexes 1…99):
Register address = 100 × parameter group
+ parameter index. For example, parameter 22.80
would be mapped to register 2200 + 80 =
402280.
32-bit values (groups 1…99, indexes 1…99):
Register address = 200 × parameter group
+ 2 × parameter index. For example, parameter 22.80
would be mapped to register 4400 + 160 =
424560.
0
Mode 1 16-bit values (groups 1…255, indexes 1…255):
Register address = 256 × parameter group
+ parameter index. For example, parameter 22.80
would be mapped to register 5632 + 80 =
405712.
1
Mode 2 32-bit values (groups 1…127, indexes 1…255):
Register address = 512 × parameter group +
2 × parameter index. For example, parameter 22.80
would be mapped to register 11264 + 160 =
411424.
2
58.34 Word order
Selects in which order 16-bit registers of 32-bit
parameters are transferred.
For each register, the first byte contains the high
order byte and the second byte contains the low
order byte.
Changes to this parameter take effect after the
control unit is rebooted or the new settings validated
by parameter 58.06 Communication control ( Refresh
settings
).
Note: If parameter 58.01 = [3] CANopen, this
parameter is hidden.
LO-HI
HI-LO The first register contains the high order word, the
second contains the low order word.
0
LO-HI The first register contains the low order word, the
second contains the high order word.
1
No. Name/Value Description Default
FbEq 16