ABB ACS280, Firmware Manual, Page: 248 / 430

248 Parameters
-30000.00 … 30000.00
kWh
Total energy. 1 = 1 kWh
45.31 Monthly peak power
value (resettable)
Value of the peak power during the present month,
that is, since midnight of the first day of the present
month.
You can reset the value by setting it to zero.
0.00 kW
-3000.00 … 3000.00
kW
Peak power value. 10 = 1 kW
45.32 Monthly peak power
date
Date of the peak power during the present month. 1/1/1980
1/1/1980...6/5/2159 Date. N/A
45.33 Monthly peak power
time
Time of the peak power during the present month. 00:00:00
Time. N/A
45.34 Monthly total energy
(resettable)
Total energy consumption from the beginning of the
present month.
You can reset the value by setting it to zero.
0.00 kWh
-1000000.00 …
1000000.00 kWh
Total energy. 0.01 = 1 kWh
45.35 Last month total
energy
Total energy consumption during the previous
month, that is, between midnight of the first day or
the previous month and midnight of the first day of
the present month.
0.00 kWh
-1000000.00 …
1000000.00 kWh
0.01 = 1 kWh
45.36 Lifetime peak power
value
Value of the peak power over the drive lifetime. 0.00 kW
-3000.00 … 3000.00
kW
Peak power value. 10 = 1 kW
45.37 Lifetime peak power
date
Date of the peak power over the drive lifetime. 1/1/1980
Date. N/A
45.38 Lifetime peak power
time
Time of the peak power over the drive lifetime. 00:00:00
Time. N/A
46
46 Monitoring/scaling settings
Speed supervision settings; actual signal filtering;
general scaling settings.
46.01 Speed scaling
Defines the maximum speed value used to define the
acceleration ramp rate and the initial speed value
used to define the deceleration ramp rate (see
parameter group
23 Speed reference ramp
). The
speed acceleration and deceleration ramp times are
therefore related to this value ( not to parameter
30.12
Maximum speed
).
Also defines the 16-bit scaling of speed-related
parameters. The value of this parameter corresponds
to 20000 in eg. fieldbus communication.
1500.00 rpm
0.10…30000.00 rpm Acceleration/deceleration terminal/initial speed. 1 = 1 rpm
No. Name/Value Description Default
FbEq 16