Sices HS 315, Техническое руководство

Страница: 250 / 255

232 Technical Handbook
Data UM Rack
page Module x
page
Battery voltage Vdc M.15
*
Charge/discharge current Adc M.15
*
Average temperature °C M.15
*
Charge level Ah M.15 -
SOH % *
*
SOC %
* *
Charge limit Adc
* *
Discharge limit Adc * *
Number of modules -
*
-
Alarms/warnings - S.02 -
*: these data are not displayed; they are readable by HS315 via Modbus.
HS315 can use highlighted data instead of its measured ones.
The management of the alarm/warnings coming from the battery is like that of CANBUS
engines. In practice, HS315 handles only two cumulative:
•
W226: cumulative warnings of the b
atteries’ electronic cards.
•
W227:
cumulative alarms of the batteries’ electronic cards.
On page S.02, when one of the alarms/warnings is present, HS315 displays the active
diagnostic codes on the last line (rotating if more than one).
The possible codes are:
•
Cell Over Voltage Warning
•
Cell Under Voltage Warning
•
Over Charging Current Warning
•
Over Discharging Current Warning
•
Over Temperature Warning
•
Under Temperature Warning
•
Cell Voltage Difference Warning
•
Module Temp Difference Warning
•
PCS-BMS Comm Loss Alarm
•
Master BMS-Slave BMS Comm Loss Alarm
•
Cell Over Voltage Alarm
•
Cell Under Voltage Alarm
•
Over Charging Current Alarm
•
Over Discharging Current Alarm
•
Over Temperature Alarm
•
Under Temperature Alarm
•
Over SOC Alarm
•
Under SOC Alarm