Sices HS 315, Техническое руководство

Страница: 122 / 255

104 Technical Handbook
When in operation and not in OFF/RESET mode, the controller performs periodical or on-event
recordings that can be partially configured with programming parameters. The controller
manages six types of archive:
1. Charge cycles.
2. Events.
3. Fast analogues.
4. Slow analogues.
5. Maximum peaks.
6. Engine-DTC.
7. Batteries-DTC
The history logs can be accessed in any controller working status. To access archive
visualization, press the ▲ and ▼ buttons till the HISTORY LOGS (H.01) page is displayed.
When in a mode limiting the use of vertical scroll buttons, you may require pressing repeatedly
the ESC/SHIFT button.
Then press ACK/
ENTER to enable the mode (moving to page “H.03”).
At the start of the procedure, the menu of the various archives functions is displayed.
The second line always shows the numerical indication of the selected function and the
number of functions in the menu. The following display lines are used to show the selectable
functions. The selected item is highlighted in reverse (REVERSE).
Use the ▲ e ▼ buttons to cyclically scroll through the menu to the lower and upper index items
(i.e. pressing the ▲ allows to directly cycle from the first item to the last one).
Press ACK/ENTER button to enable the selected function (the one highlighted in reverse);
press the ESC/SHIFT
button to return to page “H.01”.
Each time the generator is connected/disconnected to the plant battery, the controller stores
a record into this archive, that allows maximum 31 records. If the archive is full and a new
recording is required, the less recent is overwritten (so always the last 31 records are stored).
The controller stores the following measurements:
Measure Page
Type of cycle (charge/discharge). All
Date/time at the beginning of the cycle. 1
Plant battery voltage (Vdc) at the beginning of the cycle. 1
Plant battery charge level (Ah) at the beginning of the cycle. 1
Date/time at the end of the cycle. 1
Plant battery voltage (Vdc) at the end of the cycle. 1
Plant battery charge level (Ah) at the end of the cycle. 1
H.03 HISTORY LOGS |
HISTORY LOGS 1/06
1 CHARGE CYCLES
2 EVENTS
3 FAST TREND
4 SLOW TREND
4 PEAKS