Sices HS 315 Скачать руководство пользователя страница 125

Страница: 125 / 255

Technical Handbook 107

EVT.1074

01.00

Auto reset of the controller.

EVT.1075

01.00

Real time clock not valid.

EVT.1076

01.00

Real time clock updated.

EVT.1077

01.00

New power on of the controller.

EVT.1078

01.00

Parameters are reloaded with their default values.

EVT.1080

01.00

GCB closure inhibition activated (from digital input).

EVT.1081

01.00

GCB closure inhibition deactivated.

EVT.1082

01.00

Override of the engine protections is activated.

EVT.1083

01.00

Override of the engine protections is deactivated.

EVT.1086

01.00

Daylight Save Time on.

EVT.1087

01.00

Standard time on.

EVT.1202

01.00

GCB closure inhibition activated (from serial ports / USB /
ETHERNET).

EVT.1203

01.00

GCB closure inhibition activated (because GCB is tripped).

EVT.1204

01.00

GCB closure inhibition activated (because plant battery is
disconnected).

EVT.1205

01.00

GCB closure inhibition activated (because voltage on bus bars is out
of tolerance).

EVT.1221

01.00

Start inhibition activated (from clock/calendar).

EVT.1222

01.00

Start inhibition deactivated (from clock/calendar).

EVT.1430

01.00

Closure command for BCB.

EVT.1431

01.00

Opening command for BCB.

EVT.1432

01.00

BCB closed.

EVT.1433

01.00

BCB opened.

EVT.1435

01.00

Closure command for LCB.

EVT.1436

01.00

Opening command for LCB.

EVT.1437

01.00

LCB closed.

EVT.1438

01.00

LCB opened.

EVT.1500

01.00

Charge status: idle.

EVT.1501

01.00

Charge status: voltage matching.

EVT.1502

01.00

Charge status: BULK.

EVT.1503

01.00

Charge status: ABSORBTION.

EVT.1504

01.00

Charge status: FLOAT.

EVT.1505

01.00

Charge status: FLOAT ended.

EVT.1506

01.00

Charge status: cooling down in progress

EVT.1511

01.00

Charge started for minimum voltage.

EVT.1512

01.00

Charge stopped because the final charge voltage has been reached.

EVT.1513

01.00

Charge started for minimum charge level.

EVT.1514

01.00

Charge stopped because the required charge level has been reached.

EVT.1515

01.05

Engine started for discharged cranking battery.

EVT.1516

01.05

Engine stopped for recharged cranking battery.

Any anomaly is also stored in this archive. Each anomaly is stored with its own numeric code
added to:

•

2000 for the warnings.

•

3000 for the latched warnings.

•

4000 for the deactivations.

•

5000 for the alarms (blocks).

For example, when simulating an emergency stop, the archive window will display:

0048:

A048 Emergency stop

. The same event, read by the communication ports, will result as

Содержание HS 315
































































































































































































































































Результаты поиска

Содержание HS 315

Отзывы:

Похожие инструкции для HS 315

Бренды по названию

Популярные бренды

Sices HS 315, Техническое руководство

Результаты поиска

Содержание HS 315

Отзывы:

Похожие инструкции для HS 315

Бренды по названию

Популярные бренды