Sices HS 315, Техническое руководство

Страница: 251 / 255

Technical Handbook 233
•
Cell Voltage Difference Alarm
•
Module Temp Difference Alarm
•
Temp Out of Limit Fault
•
Current Out of Limit Fault
•
Cell Over Voltage Fault
•
Cell Under Voltage Fault
•
Over Charging Current Fault
•
Over Discharging Current Fault
•
Over Temperature Fault
•
Under Temperature Fault
•
Cell Voltage Difference Fault
•
Module Temp Difference Fault
•
SPI Comm Fault
•
Voltage Sensing Line Open
•
Ref Voltage Out of Range
•
CFET Short Fault
•
DFET Short Fault
•
MCU Fault
See [8].
It is a battery provided with an internally BMS system that regulates the charge. Its serial port
is normally configured with the Modbus/RTU protocol. To use it with HS315, set it as
Modbus/RTU, 115200 baud, 8 bits, no parity, 2 stop bits. The Modbus address pre-assigned
to the battery is "1".
HS315 acquires the following data from the battery:
Data UM Page
Battery voltage Vdc M.15
Charge/discharge current Adc M.15
Average temperature °C M.15
Charge level Ah M.15
SOH project % *
SOC min. % *
Nominal/extended IMD Adc *
Nominal/extended IMR Adc *
Factorized IMR Adc *
Battery mode - *
Charge mode - *
Minor Error - *
Major Error - *
Anomalies - S.02
*: these data are not displayed; they are readable by HS315 via Modbus.