IAI R-unit RSEL, Инструкция по эксплуатации, Страница: 644 / 844

Chapter
11 T
roubleshooting
11.3 Error List
11-5
ME0392-4C
Error
No.
Error name Content and Cause / Countermeasure
Me
ssa
ge
205
Target value of total times
of motion exceeded
[Content & Cause]
1) The total times of axis operation has exceeded the times set in Each
Axis Parameter No. 20 “Total travel count threshold”.
[Countermeasure]
1) Consider to have a maintenance work on the actuator.
206
Target travel distance
exceeded
[Content & Cause]
1) The total distance of axis operation has exceeded the distance set in
Each Axis Parameter No. 148 “Total travel distance threshold”.
[Countermeasure]
1) Consider to have a maintenance work on the actuator.
207
Update error
[Content & Cause]
1) Update command was received when in a mode other than Update Mode.
2) The name of the update program file selected in the update mode is
invalid.
3) The update program file is invalid.
4) The system application received an updating target specification command.
5) There is an error in the password received from the updating tool.
6) When updating, a flash-ROM write command was received before a
flash-ROM erase command.
[Countermeasure]
1) Rebooting
2) Update command was received when in a mode other than Update Mode.
2), 3), 6) Select the correct file and have an update again from the beginning.
4) Reboot the power and conduct the update again.
5) Check if the updating tool is applicable.
208
Flash ROM error
[Content & Cause]
1) Data delete in the flash ROM or writing to the flash ROM did not finish
in normal condition due to the causes below:
1. Noise Applied
2. Malfunction of Flash ROM
2) Sum check error in code domain in flash ROM
3) Version information mismatched in code domain in flash ROM
4) Data writing to the flash ROM did not finish in normal condition due to
the causes below:
1. Noise Applied
2. Malfunction of Flash ROM
5) Data delete in the flash ROM did not finish in normal condition due to
the causes below:
1. Noise Applied
2. Malfunction of Flash ROM
6) Data was corrupted in the flash ROM due to the causes below:
1. Noise Applied
2. Malfunction of Flash ROM
[Countermeasure]
1) -1, 4) -1, 5) -1, 6) -1
Take a countermeasure to noise on controller (such as installing ferrite
core)
1) -2, 4) -2, 5) -2, 6) -2
Replace SEL unit
2), 3) Rebooting