IAI R-unit RSEL, Инструкция по эксплуатации, Страница: 413 / 844

Chapter 6 Field Network, PIO, SIO
6.3 Parameter Configuration
6-94
ME0392-4C
No. Parameter Name
Setting at
Delivery
Set
Value
Unit Remarks
131 I/O Fieldbus
Own MAC address (L)
0H
MAC
address
display
186
Number of Connected option
unit
0 3 Units The number of ports used for input and output
should be number of connected units × 16 for each.
187
Option unit fix-allocated input
port start No.
-1 0
0 + (Multiple of 8) (0 to 299)
1,000 + (Multiple of 8) (1,000 to 3,999)
(Invalid if a negative value is set)
188
Option unit fix-allocated
output port start No.
-1 300
300 + (Multiple of 8) (300 to 599)
4,000 + (Multiple of 8) (4,000 to 6,999)
(Invalid if a negative value is set)
189 PIO Unit / PIO/SIO Unit Error
Monitor
1 1
0: Not monitored
1: Monitored
2: Monitored (24V I/O power supply related errors
not monitored)
3: Monitored (only 24V I/O power supply related
errors monitored)
4: Monitored (24V I/O power supply related errors
output as message level)
* Some exceptions apply
190 Option Unit Attribute 1 C800200H Optional
Bits 0 to 3: PIO unit output port data select in TF
connection error (0: Clear, 1: Hold)
Bits 4 to 7: PIO unit input port data select in TF
connection error (0: Clear, 1: Hold)
Bits 8 to 15: TF communication link error check timer
value (10 ms)
Bits 20 to 31: Link timeout value in TF
communication initialization (100 ms)
225 I/O controller AH AH
Bits 0-7: Type of Network I/F Module Control 1
(0H : Not mounted,
1H : CC-Link,
2H : DeviceNet,
3H : PROFIBUS-DP,
6H : EtherCAT,
7H : EtherNet/IP,
9H : PIO,
AH : PROFINET IO,
DH : CC-Link IE)
6.3 Parameter Configuration
ME0392-4C
6-95
● Example of Use (2)
It is the setting when using 192 points each of input and output for PROFINET IO and 48
points each of input and output for PIO in a row from the top of the input and output ports
(from No. 0 and from No. 300).
In this case, three units of PIO units (16 points x 3 units = 48 points) should be used, and the
input and output ports should be from No. 192 and from No. 492.
No. Parameter Name
Setting at
Delivery
Set
Value
Unit Remarks
1 I/O port assignment type 1 1
0: Fixed assignment
1: Automatic assignment
* Priority of I/O port assignment at automatic
assignment
(I/O1 → PIO unit • PIO/SIO unit)
14
Number of Ports Used for
I/O1 Fieldbus Remote Input
0 192 Multiple of 8
15
Number of Ports Used for
I/O1 Fieldbus Remote Output
0 192 Multiple of 8
16
I/O1 fix-allocated input port
start No.
-1 -1
0 + (Multiple of 8) (0 to 299)
1,000 + (Multiple of 8) (1,000 to 3,999)
(Invalid if a negative value is set.)
17
I/O1 fix-allocated output port
start No.
-1 -1
300 + (multiple of 8) (300 to 599)
4,000 + (multiple of 8) (4,000 to 6,999)
(Invalid if a negative value is set.)
18 I/O1 error monitor 1 1
0: Do not monitor
1: Monitor
* Some exceptions apply.
20 Input filtering periods 2 2 ms
Input signal is recognized when the status is
held for twice the period set by this parameter.
* Valid only for PIO, PIO unit / PIO/SIO unit
120 Network attribute 1 641001H Optional
Bits 4-11: I/O1 Fieldbus link error
confirmation timer value (10 ms)
Bits 12-15: Registered module data size type in
PROFINET IO configuration
(0:1 word, 1:4 words)
Bits 28-31: Input Port Data Select in I/O1 Fieldbus
Link Error (0: Clear, 1: Hold)
121 Network attribute 2 C80000H Optional
Bits 16-27: Link timeout value in Fieldbus
initialization (100 ms)
130 I/O Fieldbus
Own MAC address (H)
0H
MAC
address
display
Only lower two bytes are valid.
Input port No.0 to 191
Output port No.300 to 491
Input port No.192 to 239
Output port No.492 to 539