IAI R-unit RSEL, Инструкция по эксплуатации, Страница: 410 / 844

Chapter 6 Field Network, PIO, SIO
6.3 Parameter Configuration
6-92
ME0392-4C
[7] PROFINET IO only
It is the setting when PROFINET IO is to be used for 16 points of each input and output from
the top of the input and output ports (No. 0 ~, No. 300 ~).
No. Parameter Name
Setting at
Delivery
Set
Value
Unit Remarks
1 I/O port assignment type 1 1
0: Fixed assignment
1: Automatic assignment
14
Number of Ports Used for
I/O1 Fieldbus Remote Input
0 16 Multiple of 8
15
Number of Ports Used for
I/O1 Fieldbus Remote Output
0 16 Multiple of 8
16
I/O1 fix-allocated input port
start No.
-1 -1
0 + (Multiple of 8) (0 to 299)
1,000 + (Multiple of 8) (1,000 to 3,999)
(Invalid if a negative value is set.)
17
I/O1 fix-allocated output port
start No.
-1 -1
300 + (multiple of 8) (300 to 599)
4,000 + (multiple of 8) (4,000 to 6,999)
(Invalid if a negative value is set.)
18 I/O1 error monitor 1 1
0: Do not monitor
1: Monitor
* Some exceptions apply.
120 Network attribute 1 64 1 001H Optional
Bits 4-11: I/O1 Fieldbus link error
confirmation timer value (10 ms)
Bits 12-15: Registered module data size type in
PROFINET IO configuration
(0:1 word, 1:4 words)
Bits 28-31: Input Port Data Select in I/O1 Fieldbus
Link Error (0: Clear, 1: Hold)
121 Network attribute 2 C80000H Optional
Bits 16-27: Link timeout value in Fieldbus
initialization (100 ms)
130 I/O Fieldbus
Own MAC address (H)
0H
MAC
address
display
Only lower two bytes are valid.
131 I/O Fieldbus
Own MAC address (L)
0H
MAC
address
display
225 I/O controller AH AH
Bits 0-7: Type of Network I/F Module Control 1
(0H : Not mounted,
1H : CC-Link,
2H : DeviceNet,
3H : PROFIBUS-DP,
6H : EtherCAT,
7H : EtherNet/IP,
9H : PIO,
AH : PROFINET IO,
DH : CC-Link IE)
Input port No.0 to 15
Output port No.300 to 315