IAI R-unit RSEL, Инструкция по эксплуатации, Страница: 312 / 844

Chapter 5 Operation
5.10 ELECYLINDER Operation
5-48
ME0392-4C
5.10.10 List of related parameters
The parameters related to this feature are as shown below.
● I/O parameter
No. Parameter name
Setting
on
Delivery
Input range Unit Remarks
186
Number of Connected Option
Units
0 0 to 8 unit
Number of input and output ports should be number
of connected units x 16 for each
187
Input Port Start Number in
Option Unit Fixed Assignment
-1 -1 to 3,999
0 + (Multiple to 8) (0 to 299)
1,000 + (Multiple to 8) (1,000 to 3,999)
(Negative number invalid)
188
Output Port Start Number in
Option Unit Fixed Assignment
-1 -1 to 6,999
300 + (Multiple to 8) (300 to 599)
4,000 + (Multiple to 8) (4,000 to 6,999)
(Negative number invalid)
189
PIO Unit / PIO/SIO Unit Error
Monitoring
1 0 to 5
0: No Monitoring
1: Monitor
2: Monitor (24V I/O power supply related errors not
monitored)
3: Monitor (Monitors only 24V I/O power supply
related errors)
4: Monitor (Make 24V I/O power supply related
errors generated in message level)
* Some exceptions should be applied
190 Option Unit Attribute 1 C800200H
0H to
FFFFFFFFH
Bit 0-3: Select option unit output port data in TF
communication error (0: Clear, 1: Hold)
Bit 4-7: Select option unit input port data in TF
communication error (0: Clear, 1: Hold)
Bit 8-15: TF Communication link error check timer
value (10 ms)
Bit 16-19: For future extension
Bit 20-31: Link timeout value at TF communication
initialization (100 ms)
191 EC connection unit JOG switch 0 0 to 1
0: Enable
1: Disable
(Main application part V1.09 or later)