IAI R-unit RSEL, Инструкция по эксплуатации, Страница: 306 / 844

Chapter 5 Operation
5.10 ELECYLINDER Operation
5-42
ME0392-4C
(2) Input/Output port configuration
As it is the automatic assignment setting, the fieldbus should be assigned for 64 points from
the top, and PIO Unit #1 and #2 and EC Connection Unit #1 and #2 should be assigned for
16 points from closer order to RSEL.
● EC connection unit #1
Operate EC with the following input and output ports in the SEL program.
Control: Output port No.396 to 411
Status: Input port No.96 to 111
● EC connection unit #2
Operate EC with the following input and output ports in the host device (PLC).
Control: Input port No.48 to 63
(Host device (PLC) → Input port No.48 to 63 → Output port No.412 to 427 → EC )
* Operating Output Port No. 412 to 427 in such as the SEL program should cause
Error Code 489: “System Output Operation Error”.
Status: Output port No.348 to 363
( EC → Input port No.112 to 127 → Output port No.348 to 363 → Host device (PLC))
* Do not attempt to set other input and output features (in input, Program Start Input /
Software Reset Input / Remote Mode Control Input, etc. and for output, Error Output
/ READY Output / Output during Servo-on, etc.) to the input and output ports related
to the EC connection unit. It should cause Error Code 62D: “Input and Output
Feature Port Number Error” and so on.
Input port Output port
Field network
(Host device)
48 to 63
PIO unit #1
PIO unit #2
EC connection unit #1
EC connection unit #2
Field network
(Host device)
348 to 363
PIO unit #1
PIO unit #2
EC connection unit #1
EC connection unit #2
0
64
80
96
112
300
364
380
396
412