IAI R-unit RSEL, Инструкция по эксплуатации, Страница: 546 / 844

Chapter 10 Parameter
10.2 Parameter List (SEL Unit) 1. I/O parameter
10-14
ME0392-4C
No. Parameter name
Setting at
Delivery Input range Unit
Remarks
125 Network attribute6 31E32H
0H to
FFFFFFFFH
Bits 0 to 7: System Reservation
Bits 8 to 15: System Reservation
Bits 16 to 23: Increment of “PC/TP reconnection
delay at software reset” when
EtherNet is used [s]
126 Network attribute7 7D007D0H
0H to
FFFFFFFFH
Reserved by the system
127 Network attribute8 5050214H
0H to
FFFFFFFFH
EtherNet TCP/IP message communication attribute
Bits 0 to 7: CONNECT_TIMEOUT
(Change is prohibited)
(Setting of “0” is prohibited) [s]
Bits 8 to 15: Connection retry interval
(IAI protocol B/TCP) [s]
Bits 16 to 23: Send timeout value [s]
Bits 24 to 31: IAI protocol B-SIO non-communication
check timer setting [s]
(IAI protocol B/TCP connection trigger)
128 Network attribute9 10000H
0H to
FFFFFFFFH
EtherNet TCP/IP message communication attribute
Bits 0 to 15: SEL server open timeout value [s]
(No timeout check when “0” is set)
129 Network attribute10 0H
0H to
FFFFFFFFH
EtherNet operation requirement
Bits 0 to 3: System Reservation
Bits 4 to 7: TCP/IP message communication
(0: Not in use, 1: Use)
Bits 8 to 31: Reserved (Operation requirement)
130 I/O FIELDBUS
Own MAC address (H)
0H
Reference only
(HEX)
Only lower two bytes are valid.
131 I/O FIELDBUS
Own MAC address (L)
0H
Reference only
(HEX)
132 I/O FIELDBUS
Own IP address (H)
192 1 to 255
*Setting of “0” and “127” is prohibited.
* Setting establishment not necessary for
PROFINET IO
133 I/O FIELDBUS
Own IP address (MH)
168 0 to 255
* Setting establishment not necessary for
PROFINET IO
134 I/O FIELDBUS
Own IP address (ML)
0 0 to 255
* Setting establishment not necessary for
PROFINET IO
135 I/O FIELDBUS
Own IP address (L)
1 1 to 254
*Setting of “0” and “255” is prohibited.
* Setting establishment not necessary for
PROFINET IO
136 I/O FIELDBUS
Subnet mask (H)
255 0 to 255
* Setting establishment not necessary for
PROFINET IO
137 I/O FIELDBUS
Subnet mask (MH)
255 0 to 255
* Setting establishment not necessary for
PROFINET IO
138 I/O FIELDBUS
Subnet mask (ML)
255 0 to 255
* Setting establishment not necessary for
PROFINET IO
139 I/O FIELDBUS
Subnet mask (L)
0 0 to 255
* Setting establishment not necessary for
PROFINET IO
140 I/O FIELDBUS
Default gateway (H)
0 0 to 255
* Setting establishment not necessary for
PROFINET IO
141 I/O FIELDBUS
Default gateway (MH)
0 0 to 255
* Setting establishment not necessary for
PROFINET IO
142 I/O FIELDBUS
Default gateway (ML)
0 0 to 255
* Setting establishment not necessary for
PROFINET IO
143 I/O FIELDBUS
Default gateway (L)
0 0 to 255
* Setting establishment not necessary for
PROFINET IO
144 IAI protocol B/TCP: Own port
number (MANU mode)
64511
1025 to
65,535
* Important note: Always set a unique number for
each port number.
(Duplication of port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
145 Channel 31 opened to user
(TCP/IP): Own port number
64512
1025 to
65,535
* Important note: Always set a unique number for
each port number.
(Duplication of port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
146 Channel 32 opened to user
(TCP/IP): Own port number
64513
1025 to
65,535
* Important note: Always set a unique number for
each port number.
(Duplication of port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
147 Channel 33 opened to user
(TCP/IP): Own port number
64514
1025 to
65,535
* Important note: Always set a unique number for
each port number.
(Duplication of port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)